AC Repair Service in Boca Raton

Need Your A/C Fixed TODAY?

  • This field is for validation purposes and should be left unchanged.

Free Service Special today! Call: 954.906.2001
With one call, we can easily show you why we are the #1 Air Conditioning company in Tamarac. Dial Now (954) 906-2001.

How to Replace Your AC Thermostat

Air Conditioning Tamarac wants you to know that sometimes your ac problems all originate at your thermostat. We have seen this lots in our ac repair envevers. The experts at Air Conditioning Tamarac are always here to help so we decided to tell you how to replace your ac thermostat in causing it is causing you a lot of problems.

Air Conditioning Tamarac Instructions to Replace Your AC Thermostat:

New thermostats are ecologically cordial.

Thermostats are utilized to control focal air conditioning units and heaters in the home. More established thermostats contain the harmful substance mercury. Numerous states, for example, California, have laws that require thermostat makers to gather and reuse thermostats that contain mercury. Reuse your old obsolete air conditioning thermostats and replace them with computerized presentation thermostats for more exact controls.

Turn the force off to the territory of the house where the thermostat is situated at the principle electrical switch. Find an electrical outlet close to the thermostat that is on the same circuit. Touch one lead of the analyzer to the screw on the face plate of the outlet, and the other lead to substantial, right opening of the outlet. At the point when the neon analyzer does not light up, the force is off and it is protected to replace your ac thermostat.

Contact us now for a free estimate your Thermostat may be costing you.

Pull the spread off the old thermostat. You may need to evacuate fastens request to force it off.

Look at the screw terminals where the electrical wires connect to the old thermostat. The terminals ought to be named with letters. Wrap a bit of covering tape around every wire and make a tag with the tape. Compose the comparing wire letter onto the tape. This offers you some assistance with keeping track of the wires as you introduce the new thermostat.

Unscrew the terminal screws and tenderly unfasten the wires from the screws. Haul the wires down out of the divider by 1 creep and tape them to the divider with ceiling tape to keep the wires from tumbling down into the divider where they are hard to reach.

Uproot the screws on the old thermostat’s divider mount plate and take it off the divider.

Place the new thermostat’s divider mount plate on the divider where the old thermostat was introduced. When you can’t utilize the old screw openings, attract marks the new dividing mount screw gaps onto the divider with a pencil.

Drill 1-inch-profound openings on the imprints to fit the drywall stays gave in your new thermostat’s bundling.

Tap the drywall stays into the openings with a sled. Drive the drywall grapples into the divider with the opening of the stay flush or even with the divider surface.

Hold the divider mount plate onto the divider. Drive screws through the screw openings and into the drywall stay.

String the wires through the opening on the divider mount. Analyze the wires. Cut off frayed or crimped closed with wire scissors. Strip 3/8 inch of the protective coat of the cut wire closes with wire strippers.

Inspect the new thermostat and match up the letters on the wire labels with the named terminal screws.

Embed every wire into its comparing terminal screw post. Wrap the wires counterclockwise around the terminal screws when the new thermostat has the uncovered terminal screw rather than posts. Fix the terminal screws with a screwdriver.

Embed the batteries, if any, into the thermostat. Slide or snap the thermostat lodging onto the divider mount plate.

5 star rating on yelp
consumer affairs 5 star rating ac boca raton
Schedule your Free Service Call: 954.906.2001
We are eager to show you why we have been rated the #1 Air Conditioning company in Tamarac.
Dial Now 954.906.2001.